25| 46
24| 46
OPERATION MANUAL 088 PREAMP
Select menu item
The different items of the SETUP menus are selected by turning the input
selector (1) on the front panel or pressing the navigation buttons ► ◄ on your
remote control. (check tables)
The alphanumeric display (4) shows the selected item.
Change settings
To change the setting of a selected menu item turn the volume selector (6) on the
front panel or press the navigation buttons ▲ ▼ on your remote control.
The selected value of the menu item is indicated on the right side of the
alphanumeric display (4).
The selected value of any menu item will be saved immediately.
Exit SETUP
Exiting the setup menu is done by pushing the same switch key that has activated
the setup or by shortly pushing the MENU button on your remote control.
The display will show SETUP SAVED!.
The Global Setup
The GLOBAL SETUP offers the adjustment of global functions like INPUT LEVEL,
INPUT NAMES, displaying the SERIAL NUMBER, SWITCHING OFF CONTROL
ELEMENTS on the front panel, RC INPUT selection and resetting to FACTORY
SETTINGS.
The following chart provides an overview of all menu items, which can be adjusted
in the GLOBAL SETUP. The factory settings (defaults) are listed in brackets.
Subsequent to the chart you will find a detailed description of the menu items.
MENU ITEM DESCRIPTION DISPLAY VALUE
Input level Pre-level adjustment for
every input
INPUT
LEVEL
-06 to -01,
(00),
+01 to +12
Input names Individual input names INPUT
NAMES
Input name
Displaying serial
number
Displaying serial number after
switching on the unit
SNR (OFF) / ON
on/off of control
elements on front
panel
Activating/Deactivating
control elements on the
front panel
FRON T-P (ON) / OFF
RC Input selection Activating/Deactivation
Station +/– keys of the
remote control
RC INPUT (NO) / YES
Factory settings Loading all factory settings DEFAU LT S
The GLOBAL SETUP MENU is activated by pushing down the switch key (13) on
your device or by longer pushing the MENU button (approx. 2 sec) on your remote
control. The display indicates the activation by shortly showing GLOBAL SETUP,
followed by the first menu item.
To exit and automatically save the menu push down the switch (13) or press the
MENU button on your remote control.
To Next Page
Loading...
