7 | 46
6 | 46
OPERATION MANUAL 088 PREAMP
PLEASE NOTE:
The preamp
088
is shipped inside a plastic protective
cover. Make sure that children do not play with it to avoid the danger of
suffocation.
Unpacking
To avoid damaging the housing, please do not use pointed or sharp tools to open
the box.
Please make sure that the content of the box is complete. If something is
missing or you notice any damage while unpacking, do not hook up the unit.
Instead, contact your authorized dealer.
Content of boxes
The box should contain the following:
•
1 preamp 088
•
1 power cord
•
4 input adapter plugs XLR – RCA
•
1 owner’s manual
•
1 remote control
Packaging
We recommend keeping the original packing in case the unit needs to be shipped in
the future.
Unpacking and setting up
Setting up
NOTICE: Too low or too high temperatures may cause damage inside of
the preamp. Therefore we recommend you leave the unit to adapt to room
temperature, before using it for the first time.
Carefully remove the unit from its packaging and set it up in an appropriate location.
To protect the preamp 088 from overheating make sure that the location offers
sufficient air circulation around the unit. Also, avoid excessive exposure to sun,
dust and humidity.
Please make sure that your desired location for the preamp is stable enough to
carry its weight.
Ventilation ducts and openings in the housing serve to keep the unit cool.
They must not be covered up with magazines, tablecloth, curtains etc.
If the preamp has to be operated in an extremely warm environment it may be
necessary to supply additional ventilation. Avoid operating the unit in an
excessively humid environment like bathrooms etc.
To Next Page
Loading...
