16 | UK Declaration of Conformity
28 | 32 Instruction Manual MINK MM 1102-1104 C VM_EN_en
16 UK Declaration of Conformity
This Declaration of Conformity and the UKCA-markings affixed to the nameplate are valid for the machine within the Busch scope of delivery. This Dec-
laration of Conformity is issued under the sole responsibility of the manufacturer.
When this machine is integrated into a superordinate machinery the manufacturer of the superordinate machinery (this can be the operating compa-
ny, too) must conduct the conformity assessment process for the superordinate machine or plant, issue the Declaration of Conformity for it and affix
the UKCA-marking.
The manufacturer is determined by the serial number:
Serial number starts with DEM1… Serial number starts with CZM1…
Busch Produktions GmbH
Schauinslandstr. 1
79689 Maulburg
Germany
Busch Výroba CZ s.r.o.
Svárovská 620
460 01 Liberec 11
Czech Republic
declares that the machine: MINK MM 1104 C VM; MINK MM 1102 C VM
fulfill(s) all the relevant provisions from UK legislations:
– Supply of Machinery (Safety) Regulations 2008
– Electromagnetic Compatibility Regulations 2016
– Restriction of the use of certain hazardous substances in Electrical and Electronic Equipment Regulations 2021
and comply(-ies) with the following designated standards that have been used to fulfill those provisions:
Standards Title of the Standard
EN ISO 12100 : 2010 Safety of machinery - Basic concepts, general principles of design
EN ISO 13857 : 2019 Safety of machinery - Safety distances to prevent hazard zones being reached by the upper and lower
limbs
EN 1012-2 : 1996 + A1 : 2009 Vacuum pumps - Safety requirements - Part 2
EN ISO 2151 : 2008 Acoustics - Noise test code for compressors and vacuum pumps - Engineering method (grade 2)
EN 60204-1 : 2018 Safety of machinery - Electrical equipment of machines - Part 1: General requirements
EN IEC 61000-6-2 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Immunity for industrial environments
EN IEC 61000-6-4 : 2019 Electromagnetic compatibility (EMC) - Generic standards. Emission standard for industrial environ-
ments
Legal person authorized to compile the technical file
and importer in the UK
(if the manufacturer is not located in the UK):
Busch (UK) Ltd
30 Hortonwood
Telford - UK
Maulburg, 11.07.2022 Liberec, 11.07.2022
Dr. Martin Gutmann
General Manager
Busch Produktions GmbH
Michael Dostálek
General Manager
Busch Výroba s.r.o.
To Next Page
Loading...
Need help?
General
