Maintenance | 7
0870207738_RA_RC0400-0630C_USA_-_IM_en 17 / 32
7.3 Oil and Oil Filter Change
CAUTION
Filling oil while the vacuum pump is running.
Risk of burns! Hot gasses may escape through the oil fill port.
• Only perform oil filling when the vacuum pump is stopped.
NOTICE
Do not use inappropriate oil.
Risk of premature failure!
Loss of efficiency!
• Only use an oil type which has previously been approved and recommended by
Busch.
NOTICE
Do not fill oil through the vacuum pump inlet.
Risk of damage to the vacuum pump!
Starting the vacuum pump with excessive quantities of oil in the cylinder will break the
vanes.
• Only fill oil through the oil fill plug (OFP).
To Next Page
Loading...
