Using your DAB Micro System with Bluetooth
Let’s get started
Using your DAB Micro System with Bluetooth32
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
FM display information
When listening to an FM station you can change the information that will appear on the
second line of the display. There are several different types of information that are sent by
the broadcaster.
• Radiotext (RT)
This is scrolling text information supplied by the broadcaster. Information could be the
name of an artist or music title, DJ’s name, contact details for the radio station etc.
• Program Type (PTY)
Such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’
• Station name or frequency
Such as BBC R4 or 92-95MHz
• Audio mode
The radio will automatically switch between Stereo and Mono, depending on the
quality of the signal being received but you can override this function and manually
switch between ‘Stereo’ and ‘Mono’. Please refer to ‘Audio Mode’ on page 17.
• Day and date - supplied by the broadcaster.
1. Repeatedly press and release the Menu button on the Micro to cycle through the
different information options.
CD Mode
Note: Please make sure that you remove the cardboard shipping protector from within
the CD compartment before you try to use CD player.
Check that your Micro is in CD mode. If you are not already in CD mode, briefly press and
release the Mode button on the front of the Micro or on the remote control, until you are
in CD mode (check the display). The display will show ‘Reading’, followed by ‘No disc’. If
the CD compartment is empty.
To Next Page
Loading...