Using your DAB Micro System with Bluetooth
Let’s get started
Using your DAB Micro System with Bluetooth34
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
• Fast backward within a track:
Press and hold the button on the Micro or on the remote control.
• Stop
Press and release the button on the Micro or on the remote control.
Programmed play mode
In programmed play mode, you can program the play order of the tracks on your CD.
You can program up to 20 tracks in total.
Note: To set up programmed play mode, the CD must be stopped in the CD
compartment and must not be paused or playing.
In CD mode, with the CD you wish to programme in the CD compartment and stopped:
1. Press and release the Menu button on the Micro or press and release the Prog. button
on the remote control to enter CD programmed play mode. ‘Pro P01 T00’ will be
displayed and the two zeros after the ‘T’ will flash.
2. Use the or buttons on the Micro or on the remote control to go to the track
number that you would like to program to play first. Press and release the Menu
button on the Micro or the Prog. button on the remote control to confirm.
3. ‘Pro P02 T00’ will now be displayed and you can select the second track that you
would like to programme. Continue to select each track as in Step 2 above, up to a
total of 20 tracks.
4. Press and release the button on the Micro or on the remote control to play the
programmed tracks.
5. To exit programmed play mode, press and release the button twice on the Micro or
on the remote control.
To Next Page
Loading...