Using your Handheld DAB Radio
Let’s get started
Using your Handheld DAB Radio
19
section of these instructions, or online at www.bush-support.com If you still require further assistance, call one of our experts on 0345 600 3021.
If you are not already in DAB mode, press and release the Mode button to go to DAB
mode.
1. Press and hold the Menu button to enter the Menu options.
2. ‘Full Scan’ will be highlighted. Press and release the Select button to begin a search for
stations. The display will change to ‘Scanning...’ A progress bar will show the progress
of the scan and the number of stations found during the scan will also be displayed.
Prune DAB stations
You can remove the DAB stations in the station list that cannot be received in your area.
These are listed with a ‘?’ prefix.
In DAB mode:
1. Press and hold the Menu button. Use the or button to scroll to ‘Prune Invalid’.
Press and release the Select button.
2. ‘Proceed to prune the invalid stations?.
Yes No
’ is displayed. Use the or
button to highlight ‘Yes’. Press the Select button to prune the station list. Stations with a
‘?’ prefix will now no longer be displayed. Press and release the Menu button to return
to the station display.
Storing a DAB station preset
Your radio can store up to 20 DAB stations in its preset memories for instant access to
your favourite stations.
Note: When you store DAB radio station presets, these do not overwrite your FM station
presets.
1. Tune your radio to the station that you wish to preset (see changing DAB stations on
page 18).
2. Press and hold the Preset button. ‘Save to Preset’ and a list of numbered preset
locations is displayed (1-20).
3. Use the or button to highlight the Preset location that you would like to store the
radio station to (1-20).
To Next Page
Loading...
