Using your Handheld DAB Radio
Let’s get started
Using your Handheld DAB Radio
20
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting
4. Press and release the Select button, the display will confirm ‘Preset X saved’, where ‘X’
is the number of the preset (1-20).
Note: If there is already an existing DAB station stored under a preset, it will be
overwritten when you store the new station.
Tune to a DAB preset station
In DAB mode:
1. Press and release the Preset button. ‘Preset Recall’ and a list of numbered preset
locations is displayed. The name or frequency of any stored stations is also displayed
or ‘(Empty)’ if no previous station has been stored.
2. Use the or button to highlight the Preset location and station that you would like
to listen to (1-20). Press and release the Select button. The radio will instantly tune to
that station and begin to play.
Note: If no DAB station has been stored under the preset button, ‘Preset Empty’ will be
displayed and the radio will revert to the previously selected radio station.
DAB display information
When listening to a DAB station you can change the information that will appear on
the display by pressing the Menu . There are several different types of information that
are sent by the broadcaster.
• Dynamic Label Segment (DLS) - This is scrolling text information supplied by the
broadcaster. Information could be the name of an artist or music title, DJ’s name,
contact details for the radio station etc.
• Program Type (PTY) - such as ‘Rock’, ‘Pop‘, Talk’ or ‘News’
• Multiplex Name - displays the broadcasting area and collection of radio stations on
this frequency e.g.: BBC National DAB, Digital 1 Network.
• Time and date - Supplied by the broadcaster.
To Next Page
Loading...
