Page 11
User instructions
AUDIO MENU
DOWNMIX
This option allows you to change the way the audio is
assigned to each speaker. Choose from :
LT/RT - Left / Right mixed mode
STEREO - Stereo audio output
DOLBY DIGITAL MENU
DUAL MONO
Only applies to discs with AC3 DD5.1
STEREO: The audio frequency on the Left & Right
channels will be output respectively from the Left &
Right speakers.
LEFT-MONO: The audio frequency on the Left & Right
channels will be output only from the Left speaker.
RIGHT-MONO: The audio frequency on the Left & Right
channels will be output only from the Right speaker.
MIX-MONO: The audio frequency on the Left & Right
channels will be merged together and output from
both Left & Right speakers.
DYNAMIC
When watching a disc with high dynamic audio at low
volumes you can increase the dynamic range to reduce
the loss of sound details.
VIDEO MENU
SHARPNESS
Set the image sharpness value from HIGH, MEDIUM or
LOW.
BRIGHTNESS
Set the image brightness level from -16 to +16.
CONTRAST
Set the image contrast level from -16 to +16.
HUE
Set the image hue level from -9 to +9.
SATURATION
Set the image colour level from -9 to +9.
PREFERENCE MENU
TV TYPE
Set this option to whatever type of TV you have
connected. NTSC, PAL or AUTO (to set automatically).
PREFERENCE MENU (cont)
AUDIO LANG
Choose the default audio setting. This means the DVD
player will automatically select this language as the
audio track ( if available ).
SUBTITLE LANG
Choose the default subtitle language.
DISC MENU
This option sets the default DVD menu language, once
set if the DVD you are watching contains a menu with
your specified language that is used by default.
PARENTAL
You can set a system rating so only movies that fall
within that rating can be played.
Choose between: Kid Safe, G, PG, PG13, PGR, R, NC-17
and Adult.
NOTE: To change the parental rating you will need
to enter the password (default is ‘1234’).
PASSWORD
A password can be set to prevent unwanted usage of
the unit.
1: Should you wish to change the default password,
navigate to the PASSWORD option and press the OK
button. Select CHANGE and press OK again.
2: Input the default password ( the default is 1234) in
the OLD password box.
3: You can now enter a new password using the numeric
buttons. Once entered you will need to enter once
more to confirm the password.
4: Press OK to confirm the new password.
NOTE: Should you forget the new password you
can use the master code‘1369’ to gain access.
DEFAULT
This setting when activated restores the default
settings to the system.
NOTE: This is not reversible once activated.
To Next Page
Loading...
