Bush CDVD12SWM - SEARCH Function; Program Playback (up to 20 Tracks); Selecting an Audio Track; Change Viewing Angle

Page 8
User instructions
SEARCH function
The SEARCH function allows you to enter a specific
chapter, title, audio track, subtitle track, angle and
specific time codes.
1: Press the GOTO button during playback to activate
the GOTO SEARCH menu screen. Press repeatedly to
cycle the available GOTO SEARCH options.
2: Then use the numeric buttons to enter the specific
digits relating to which ever chapter, title, timecode
etc you require.
Program playback (up to 20 tracks)
1: Press the PROGRAM button, the below screen will be
displayed
5
Exit NEXT
4
3
2
1
_ _
_ _
_ _
_ _
_ _
10
9
8
7
6
_ _
_ _
_ _
_ _
_ _
2: Use the navigation buttons to select the playback
sequence number and then type in the chapter (DVD)
or track (CD) digits using the numeric buttons.
3: Should you need to program more than 10 chapters/
tracks navigate to the NEXT option and press OK to
advance to 11-20.
4: Once setup navigate to START option and press OK.
5: To clear the setup screen navigate to OK and press
ENTER.
Selecting an audio track
When viewing a DVD, you may wish to change the
audio track for example You wish to use a 2 channel
version instead of 5.1 or you require another language
other than the default.
1: Press the AUDIO button (5) on the main unit or
remote, every press will cycle through the available
audio tracks, and the details will be displayed on the
screen.
NOTE: This DVD player does NOT support DTS
audio. If you select a DTS audio track or one is
selected automatically no sound will be output.
Should this occur select a compatible audio track.
2: When no extra audio tracks are available, pressing the
button will do nothing.
Change viewing angle
1:Press the ANGLE button to select the desired angle
you wish to view the scene in.
NOTE: Not all DVD discs have multi-angles and as
such pressing the button will do nothing.
Subtitles
You may wish to watch a DVD with a subtitle track
enabled. To activate and choose the correct subtitle
track follow these steps.
1: Press the SUB-T button to view the first subtitle
option.
2: Press repeatedly to cycle through the available
subtitle options.
3: When you have found the track you wish to view
release the button for a few seconds to activate.
4: To cancel press the SUB-T button until you see [OFF].
DVD menu
To display a DVD’s menu at any time follow the below.
1: Press the MENU button to return to the main menu.
2: Press the TITLE button to return to the DVD title
menu.
Picture disc / JPG image viewer
You can view images from either a CD/DVD disc,
SD/MMC card or USB flash drive. Follow the below
steps to begin viewing.
00:00 00:00
052/086
Resolution 2592 x 1944
DSC00283
DSC00283
DSC00283
DSC00283
DSC00283
DSC00283
1: Insert a Kodak Picture CD / JPG Picture CD into the
disc tray
2: A slide show of the picture CD will begin to play
automatically.