Fiskars Boats, Inha Works Ltd 2010
18 (31)
5.10 Good seamanship – other recommendations and
instructions
5.10.1 How to avoid falling overboard and procedures for getting back
on board
The boat’s work areas are marked in Diagram 7. Do not sit, stand or walk in other
parts of the boat while it is in motion.
If someone falls overboard, the easiest way to get back on board is via the swim
ladder at the stern, which can also be pulled down by the person in the water.
Remember to switch the engine off as the swimmer approaches the boat.
Diagram 7. Location of work decks (defined areas) and swim ladder (1).
5.10.2 Securing loose equipment
Secure all weighty items, such as the anchor, in place before departure. Bear in
mind that wind and turbulence can easily snatch away lighter objects.
5.10.3 Respect for the environment
Shorelines everywhere (sea and lakes alike in all countries where Buster boats are
sold) are a precious natural resource and their preservation is a matter of honour for
all sailors. Therefore, avoid