Fiskars Boats, Inha Works Ltd 2009
31 (31)
General requirements
Basic information EN ISO 8666:2002
2.1 Hull markings ISO 10087:1996 / A1:2000
2.2 Manufacturer's plate RCD annex I, 2.2
2.5 Owner's Handbook EN ISO 10240:2004
Arrangements and equipment
2.3 Prevention of falling overboard EN ISO 15085:2003
3.7 Stowing life raft -
3.8 Emergency exit -
3.9 Anchoring and towing EN ISO 15084:2003
5.7 Navigation lights 1972 COLREG
5.8 Prevention of emissions -
Installations
5.1 Engines and engine space -
5.2 Fuel system EN ISO 10088:2001, EN ISO 11105:1997
5.3 Electrical system EN ISO 10133:2000, ISO 8846:1990
5.4 Steering system EN ISO 28848 + A1:2000
5.5 Gas equipment -
5.6 Fire prevention EN ISO 9094-1:2003,
Dimensions
3.1 Structure RSG Guidelines, NBS-VTT Extended rule
Hydrostatics
3.2 Stability and freeboard EN ISO 12217:2002, EN ISO 12217-3:2002/DAM 1
3.3 Buoyancy EN ISO 12217:2002
3.6 Maximum permitted load EN ISO 12217:2002, EN ISO 14946:2001
3.4 Hull and deck openings -
3.5 Filling with water EN ISO 15083:2003, ISO 8849
Drive characteristics
4 Drive characteristics EN ISO 11592:2001
2.4 Visibility from steering position RSG Guidelines, EN ISO 11591
- = is not relevant for the security of the particular boat model, or the system in question is not used in the boat.
To Next Page
Loading...
