INSTRUCTION, USE AND
MAINTENANCE MANUAL
GB
Page 23 of 67
11.2.5 Tyre demounting in “AUTO” mode
(from PC)
There are two ways to operate the automatic function-
ing managed by the PC:
A. Manual data entry and activation of the automatic
operations.
In this case repeat the operations from point 1 to
9 described in paragraph “11.2.3 Read in of rim/
tyre combination in memory bank” then press
the assent pedal (Fig. 16 ref. C) and keep it pressed
in order to activate the automatic functions. The
machine automatically performs all tyre demount-
ing operations.
B. Loading of memory bank data and following activa-
tion of automatic operations.
When the rim/tyre combination is already present
in the memory bank, a few operations are required
to activate the machine automatic functioning, in
particular:
1. Press key from “Home” page.
2. Press key to enter the memory bank.
1
2
3
All rim/tyre combinations are displayed.
3. Select the rim/tyre combination present in the
memory bank.
THE WHEEL, PLATE NUMBER OR
OWNER SEARCH FIELDS (POSI-
TION 1, 2 AND 3 IN THE SCREEN
PAGE ABOVE) CAN BE USED IN
ORDER TO REDUCE TO A MINI-
MUM EXTENT THE SELECTION
LISTS: INSERT THE VALUES
IN THE PROVIDED FORESEEN
FIELDS.
THE MEMORY BANK CAN ALSO
BE ARRANGED USING THE COL-
OURED KEYS IN THE BOTTOM
PART OF THE SCREEN PAGE: BY
WHEEL (YELLOW KEY), NUMBER
PLATE (GREY KEY) OR BY OWNER
NAME (BLUE KEY) RESPECTIVELY.
4. At the end, confirm the selection with
key. The
screen page showing valve position is displayed.
Therefore press key and then the assent pedal
(Fig. 16 ref. C): the machine automatic cycle starts.
THE SAME CYCLE CAN BE ACTI-
VATED QUICKLY PRESSING THE
ASSENT PEDAL TWICE (FIG. 16
REF. C) (DOUBLE CLICK).
CAPTURE 4 - CAPTURE 4 FI
7104-M007-4_B
To Next Page
Loading...