18
AUS
8.7 Adding regenerative
Rell the regenerative no later than when the sieve
base becomes visible or when SALt is indicated
on the display.
Recommended salt: Cube or pellet salt is recom-
mended. This type of salt is high purity evaporated
crystals, formed and pressed into briquets. It has less
than 1 % insoluble (not dissolvable in water) impurities.
● Open the cover (4). Pour regenerative into the
storage area (5).
● Press OK button
The SALt display disappears.
Rell the unit in such a way that no dirt can get
into the storage area (5) (if necessary, clean the
packages containing the regenerative before use).
In case of any soiling clean the storage area or brine
cavity (6) with drinking water thoroughly.
8.8 Service message
A ashing litre display indicates that it is time for
servicing. The service message appears after 150
regenerations.
Please contact after-sales service.
4
6
5
SALt
4433 L
To Next Page
Loading...
