BWT Bewamat 75A - Product-Specific Safety

5
5
AUS
1.5 Symbols used
This symbol indicates general
risks to persons, machines, or the
environment.
This symbol indicates general risks
due to the mains voltage.
Risk of death by electric shock!
This symbol indicates information
or instructions which must be ob-
served to ensure safe operation.
Disconnect the mains plug before
all service and repair work.
This symbol indicates information
that is important to follow.
1.6 How safety instructions are
displayed
In this document safety instructions precede any
sequence of actions that could cause harm to per-
sons or damage to property. All hazard prevention
measures must be followed. Safety instructions are
displayed as follows:
SIGNAL WORD!
Source of hazard
(e.g. electric shock)
Type of hazard
(e.g. risk of fatal injury)!
► Escape or prevent hazard
► Rescue measure (optional)
Signal word / colour Indicates the severi-
ty of the hazard
Warning symbol Calls attention to
the hazard
Source / type of hazard Indicates the type
and the source of
the hazard
Consequences Explains the con-
sequences of not
following the safety
instructions
Hazard prevention
measure
Explains how to
avoid the hazard
Signal
word
Colour Severity of the hazard
DANGER High-risk hazard.
Indicates a hazardous
situation which, if not
avoided, will result in
death or serious injury.
WAR-
NING
Hazard with a moderate
degree of risk.
Indicates a hazardous
situation which, if not
avoided, could result in
death or serious injury.
CAUTION Low-risk hazard.
Indicates a hazardous
situation which, if not
avoided, may result
in minor or moderate
injury.
1.7 Product-specicsafetyinstruc-
tions
DANGER!
High voltage!
Risk of death by electrical shock!
► Unplug device before any service and
repair works.
► If the supply cable of the appliance is da-
maged, it must be replaced by an original
BWT cable.