BWT Bewamat 75A - Bewamat 75 A Specifications

22
AUS
13 TechnicalSpecications
Water softener Type Bewamat 75 A
Nominal connection width DN 32
Connection type G1¼“
Nominal capacity in accordance with DIN EN 14743 mol (m
3
x°dH) 13,4 (75)
Capacity / kg of regenerative salt in accord. with DIN EN 14743 mol 3,8
Peak ow when blending from 20 to 8°dH m
3
/h 3
Operating ow when blending from 20 to 0°dH m
3
/h 1,8
Nominal ow in accordance with DIN EN 14743 m
3
/h 1,8
Nominal pressure PN kPa 1000
Operating pressure, min./max.
1)
kPa 250 - 1250
Pressure drop at operating ow kPa 100
Application residential units
persons
-
Ion exchange material ll quantity l 21
Supply of regenerative, max. kg 50
Consumption of regenerative per regeneration, max. kg 3,5
Flushing water consumpt per regeneration
at 400 kPa, max.
l 128
Flushing water ow during regeneration, max. l/h 500
Regeneration time, max. min 40
Water temperature, min. – max. °C 5 - 25
Ambient temperature, min. – max. °C 5 - 40
Humidity non condensing
Mains power V/Hz 230/50
Unit voltage VDC 18
Power during operation W 4
Max. power during regeneration W 38
Max. fault message output VDC / A -
Protection class IP44
Operating weight if lled to max. kg 100
Shipping weight, approx. kg 50
Production number PNR 6-501199
Order number 11379
1) Operating Pressure in accordance with ATS 5200.103-2004: 250 – 1250 kPa
Operating Pressure Recommended by BWT: 250 – 800 kPa