BYD M6 - Page 128

BYD M6 AUTO Owner’s Manual
Air Conditioning (A/C) System 2-14
Outside Button
If you press the Outside button, the
outside temperature will be displayed
on screen at the driver’s side.
Press the Outside button again to
display the temperature setting.
You can also press the Temperature
button to turn off the outside
temperature display.
Separate Control Button
You can use this button to separately
control the temperature at the driver
and front passenger side.
You can switch between separate
mode and associated mode.
y Separate mode: temperature is
selected separately for the driver
and front passenger. The indicator
will turn on when selecting the
Separate mode;
y Associated mode: the tempera-
ture at the driver and front
passenger sides are set to the
same. The indicator will go out
under associated mode.
Under associated mode, when you
press the temperature control button
for the front passenger side, the A/C
system will switch to separate mode.
Temperature Button
Under separate mode, use this button
to adjust the temperature of the driver
side.
Under associated mode, use this
button to adjust the temperature for
both the driver and front passenger.
Press 〈 to reduce the temperature,
press 〉 to increase the temperature.
When the temperature reaches the
lower limit, LO will appear on the
screen; when it reaches the upper
limit, HI will appear on the screen.
FRONT PASSENGER/Temperature
Button
Under separate mode, use this button
to adjust the temperature of the front
passenger side.
Under rear mode, use this button to
adjust the temperature of rear seats.
Press 〈 to reduce the temperature,
press 〉 to increase the temperature.