BYD M6 AUTO Owner’s Manual
Key & Doors 1-24
CAUTION
Insert the support rod into the slot
and firmly support the hood to
prevent it from dropping, which
cause personal injury.
Close Engine Hood
Make sure no service tool or fabric is
left in the engine compartment before
closing the hood. Fold the support rod
to the latch to prevent giving out
clicking sound. Lower the hood and
make sure it is locked up. If necessary,
slightly press the hood at the front end
to engage the latch.
NOTICE
Make sure the support rod is folded
completely before closing the hood.
Unfolded part of the support rod
may cause deformation of the
engine hood.
Oil filler cap
Open fuel filler cap
Pull up the release handle of the fuel
filler cap and the cap bounces
outward.
Shut off the engine when refilling fuel.
NOTICE
When the left sliding door is opened
completely, do not open the fuel
filler cap. Otherwise it could be
damaged.
To remove the fuel tank cap, slowly
rotate it anti-clockwise, wait for a
moment and then remove it. Hang the
cap on the support after removing it.
NOTICE
To prevent damage to the cap, do
not exert any force except in the
rotational direction to it. Do not pull
or pry the cap.
To Next Page
Loading...
