BYD M6 - Page 133

BYD M6 AUTO Owner’s Manual
Air Conditioning (A/C) System 2-19
Heating
For better heating performance, make
the following settings on the A/C
control panel:
Automatic operation:
Press AUTO button
Temperature – set to your desired
temperature
Air intake mode – exterior circulation
(outside air)
A/C - OFF
Manual operation:
Fan speed – set to your desired
speed
Temperature – set to a high
temperature (red area)
Air intake mode – exterior circulation
(outside air)
Air delivery mode -
A/C - OFF
y To warm up the vehicle quickly,
enable the interior circulation for a
few minutes. To prevent fogging
on the windows, use exterior
circulation for air intake after the
inside is warmed up.
y When heating up, press A/C
button to reduce moisture in the
air.
y To heat up the inside during
defogging or defrosting, set the air
delivery mode to
.
A/C
For better heating performance, make
the following settings on the A/C
control panel:
Automatic operation:
Press AUTO button
Temperature – set to your desired
temperature
Air intake mode – exterior circulation
(outside air)
A/C - ON
Manual operation:
Fan speed – set to your desired
speed
Temperature – set to a low
temperature
Air intake mode – exterior circulation
(outside air)
Air delivery mode -
A/C - ON