BYD M6 - Driving and Parking with Keyless Entry & Start System

BYD M6 AUTO Owner’s Manual
Starting and Driving 4-5
the dashboard comes on, it
indicates the steering wheel is
locked.
To release it, press down the Start
switch and shake the steering
wheel slightly at the same time.
y If the orange indicator on the Start
switch is flashing and the keyless
entry & start system indicator on
the dashboard comes on, it
indicates the steering lock is faulty.
Please contact a BYD service
station to check the vehicle and all
keys.
y In addition to the situations above,
the keyless entry and start function
may not work under certain
ambient conditions. For details,
see “Keyless Entry & Start
System” in section 1-2.
Driving and Parking with
Keyless Entry & Start System
Tips on Use of Keyless Entry &
Start System
When using the keyless entry & start
function, you must have a smart key
on hand to start the engine.
Sometimes a passenger may take
away the smart key without letting the
driver know it, and in this case the
engine cannot be started. In addition,
the power may not be at OFF when
you leaving the vehicle.
Always take the smart key with you
when leaving the vehicle.
NOTICE
y Don’t touch the Start switch in
driving.
If an emergency engine stop is
necessary when you are driving the
vehicle, press and hold the Start
switch for 3 seconds.
Keyless Entry & Start System
Indicator
System Function Reminder
In case of any of the following
warnings, follow the instructions
below:
(A) If the combination instrument
buzzer sounds once when
turning on the ignition switch;
This indicates the smart key is not
inside the vehicle. The keyless entry
& start system indicator stays on for
up to 8 seconds. You can operate the
ignition switch only when the smart
key is inside the vehicle.