BYD M6 - Page 17

BYD M6 AUTO Owner’s Manual
Keys &Doors 1-9
Replace the battery in the electronic
smart key by the following steps
1. Press the release switch
downwards and then remove the
mechanical key.
2. Open the cover of the electronic
smart key with a flat head
screwdriver or similar tool.
3. Remove the depleted battery with
the flat head screwdriver or similar
tool. Insert the tool into the guide
slot and pry off the battery as
shown in the figure above.
NOTICE
Don't modify the battery cover, or it
may cause fault.
4. Install a new battery in place with
the anode side (+) facing upward.
Insert the mechanical key back
into the electronic smart key.
Firmly install the cover of the
electronic smart key.