BYD M6 AUTO Owner’s Manual
Safety Devices 1-31
Adjust Driver’s Seat Manually
Seat adjustment shall be conducted
before you drive.
After adjustment, shake the seat to
make sure it is locked in place.
1. Seat position adjustment
Hold the seat unlock lever in the
middle and pull it upwards. Slide the
seat to your desired position and
release the lever.
Shake the seat to make sure that it is
locked in place.
2. Seat height adjustment
Rotate the regulating knob to lift or
lower the seat.
3. Seat back adjustment
Pull up the seat back adjustment lever
without leaning against the seat back.
Adjust the seat back to the desired
angle by leaning on it and then
release the adjustment lever.
After adjustment, make sure the seat
is locked in place.
Adjust front passenger seat
To Next Page
Loading...
