EasyManua.ls Logo

BYD M6 - Page 88

BYD M6
227 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BYD M6 AUTO Owner’s Manual
Instrument and Multifunction Display 1-80
There are multiple indicator lights on
the instrument panel indicating
important information of the vehicle.
Driver’s seat belt indicator
The driver’s seat belt reminder
system alerts the driver to properly
wear the seat belt by means of sound
and visual indication.
If you press the Start button and turn
the power to ON, the seat belt
indicator will flash and the buzzer will
sound, alerting the driver to fasten the
seat belt. If you drive the vehicle
without wearing the seat belt, the
indicator keeps flashing with the
buzzer giving out alarm tone. If the
seat belt is not fastened after a certain
period of time, the indicator stays on
and the buzzer stops.
When the seat belt is buckled, the
indicator will be turned off and the
buzzer will stop.
Oil pressure indicator
This indicator gives warning when the
engine oil pressure is low.
If you press the Start button and turn
the power to ON, this indicator will
turn on and stay on until the engine is
started.
If this indicator is flashing or stays on
in driving, it indicates that there is a
problem with the engine oil system.
Stop the vehicle immediately at a safe
place. Please contact a BYD service
station for help.
This indicator may also turn on when
the oil level is low. This indicator is not
designed to indicate low oil level. Use
an oil dipstick to check the oil level.
NOTICE
Do not keep driving when this
indicator is turned on. Otherwise the
engine may be damaged.
Charging system indicator
If you press the Start button and turn
the power to ON, this indicator will
turn on and stay on until the engine is
started.
If this indicator turns on when the
engine is running, it indicates there is
a problem with the electrical charging
system. Immediately turn off all
electrical accessories, such as the
radio, and contact a BYD service
station for help.
Engine fault indicator
If you press the Start button and turn
the power to ON, this indicator will
turn on for a few seconds.
If there is a fault with the engine in
driving, this indicator will turn on. Stop
the vehicle at a safe place and turn off
the engine. Start the engine again and
check whether this indicator stays on.
If it does, contact a BYD service

Table of Contents

Related product manuals