BYD SEAL - Page 112

WARNING
press the "P" button once the
vehicle has stopped completely.
Electronic Parking Brake
(EPB)*
Be sure to engage the EPB every time
before parking and leaving the vehicle.
Engaging EPB Manually
Set EPB on the "EPB" option on
infotainment touchscreen, when you
press the brake pedal and EPB is
released, EPB applies an appropriate
parking force, the indicator on the
instrument cluster 󽗊ashes and then is
steady on, indicating that EPB is engaged.
In addition, a text prompt "EPB activated"
is displayed.
CAUTION
●
󽗊ashes, EPB is working. If
the vehicle is on a slope, do not
release the brake pedal until
is
steady on. Otherwise the vehicle
may move down.
Automatic EPB Engagement
Automatic EPB engagement
●
When the vehicle is powered o󽗈, EPB
automatically engages and the
indicator lights up on the cluster.
Automatic "P" gear engagement
●
Press the brake pedal to stop the
vehicle and engage P gear. EPB is
engaged automatically. Do not release
the brake pedal until the indicator on
the cluster stops 󽗊ashing and become
steady on and the "EPB engaged"
message is displayed.
CAUTION
●
After the trailer mode for EPB
is enabled via the infotainment
system, EPB will be not activated
automatically when the vehicle is
in "P" mode or powered o󽗈. This
function may be used for towing
or pushing the vehicle after the
vehicle breaks down.
●
Do not release the brake pedal
early in the process, especially
when the vehicle is stopped on
a slope; otherwise, there will be
a risk of vehicle sliding to slight
extent.
●
This function is designed to
improve the vehicle safety.
Excessive reliance on or frequent
use of the function is not
recommended. To ensure safety,
make sure that the transmission is
shifted to "P" before getting o󽗈.
Automatic EPB Release upon Vehicle
Start
●
With the vehicle parked, start the
vehicle, press and hold the brake
pedal, and shift the gear from "P"
or "N" into a driving gear like "D"
or "R". EPB is released automatically,
the indicator turns o󽗈, and a "EPB
released" message is displayed.
CAUTION
●
Please follow the correct shift
instructions and keep depressing
the brake pedal throughout the
shifting process. Do not release
the brake pedal until the gear
position shown on the instrument
cluster is the target one.
111
04
USING AND DRIVING