3. Press and hold the remote start/stop
button on the electronic smart key
for 2 seconds. The vehicle stops and
powers o, and turn signals ash
twice.
Gear Shift Controls
●
The gear position of the gear actuator
is marked on the gearshift lever.
●
"P" gear is for parking, press this
button to park the vehicle and the
parking indicator will light up. Press
the brake pedal to start the vehicle,
you may shift from "P" to another
position.
CAUTION
●
To avoid injury, press the "P"
button only after the vehicle has
completely stopped.
●
"R": Reverse, used only when the
vehicle has come to a complete stop.
●
"N": Neutral, used for temporary stop.
Under all circumstances, always shift
to 'P' before the driver gets out.
●
"D": Drive, shift to D position to drive
the vehicle normally.
●
If the shift is successful, the lever
returns to its middle position after it is
released.
●
Turn the ignition on in “OK" button
before shifting into "D".
●
Shifting out of "P" or into "D" gear
requires pressing the brake pedal. For
details, see the prompt message on the
instrument cluster.
WARNING
●
If the motor is turned o and
the vehicle travels for a long
time after it is in the "N"
gear, the transmission may be
severely damaged due to lack of
lubrication.
●
When the motor is running and
the vehicle is in the "R"/"D"
gear, always stop the vehicle by
stepping on the brake pedal, as
there is still force transmitted
from the actuator and the vehicle
can travel slowly even in its idle
condition.
●
If you want to shift a gear while
driving forward, do not step on
the accelerator pedal to prevent
accidents.
●
Never shift to "R" or press the
"P" button while the vehicle
is moving, in order to prevent
accidents.
●
Never coast downhill in "N" or "P",
even if the motor is not running.
●
To prevent unintended vehicle
movement, pull up the brake and
110
To Next Page
Loading...
