BYD SEAL - Page 127

●
If TSR is disabled manually by pressing
buttons,
is displayed on the cluster.
●
The speci󽗉c numbers displayed as
above will be based on the actual
tra󽗋c signs.
●
If TSR is disabled manually by pressing
buttons,
is displayed on the cluster.
Precautions
●
The tra󽗋c sign recognition system
identi󽗉es speed limit signs only, it
cannot control the speed. The vehicle
control always vests in the driver.
Please drive properly.
●
Weight limit signs not in standard
size as per national regulations may
mistakenly be identi󽗉ed as speed limit
signs.
●
If the speed limit sign is unclear
or distorted, inclined, re󽗊ective,
partly covered or overlaid, the
multifunctional video controller may
be unable to identify the sign
completely or clearly.
●
TSR performance depends on weather
conditions, lighting, and sign visibility.
The system may be unable to
recognize signs completely or clearly at
night or sunset, in rainy, foggy, hazy,
snowy or dusty environment, when
light is coming from the back of the
vehicle, or when there is a sudden
change in lighting.
●
In case there is a collision or the
sensor has been reassembled, it
is recommended to go to a BYD
authorized dealer or service provider
for sensor calibration so as to avoid
a󽗈ecting system performance.
●
If the vehicle is sold in Europe,
it can only recognize Tra󽗋c Jams,
Construction Zones and Accident
Ahead when linking to the Internet.
(Provided that the system supports
these recognitions.) It is suggested to
use this funcion when linking to Wi-
Fi/hotspot. You can also open “TSR
mobile data” which would consume
vehicle tra󽗋c, if the used tra󽗋c
reaches the monthly limit, the function
is diabled.
WARNING
●
TSR serves as a driver assistance
function only, so the driver must
be fully responsible for driving
safety.
●
In󽗊uence of weather, road
conditions, and other factors may
cause TSR to fail or lead to late
alarms.
●
Use TSR based on your needs,
tra󽗋c, and road conditions.
Intelligent Speed Limit
Control (ISLC)*
●
The Intelligent Speed Limit Control
(ISLC) system integrates ACC and
TSR. With the system enabled, if the
vehicle travels faster than the detected
speed limit, a con󽗉rmation prompt is
displayed asking whether to set cruise
speed to that limit. After the driver
con󽗉rms, the system will automatically
set cruise speed to the limit to prevent
speeding. After the driver con󽗉rms (roll
down ② ACC speed control lever), the
system will automatically set cruise
speed to the limit to prevent speeding.
126