●
This function is available at the 30~150
km/h (20~95 mph) speed range.
How to Use
●
Enable or disable ISLC in infotainment
touchscreen
→ ADAS → Driving
Assist → TSR → ISLC.
●
When the TSR system is disabled,
the ISLC switch is grayed out and
unusable. ISLC is turned o at this
time. The ISLC switch will be usable
after the TSR system is enabled again.
●
ISLC can be activated provided that
ACC is active.
CAUTION
●
The Intelligent SpeedLimit
Control (ISLC) system integrates
the Adaptive Cruise Control (ACC)
and Trac Sign Recognition (TSR)
functions. Therefore, ACC and
TSR function precautions should
be followed during use (see the
previous chapter for details).
●
ISLC is a driver assistance system,
so the driver must keep control of
the vehicle at all times.
●
ISLC performance depends on
weather conditions, lighting, and
trac sign visibility. The system
may fail to or incorrectly identify
the sign at night or sunset, in rain,
fog, haze, snow or dust, when
CAUTION
light is coming from the back of
the vehicle, or when there is a
sudden change in lighting.
WARNING
●
ISLC only serves as a driving
assistance function, so the driver
must be fully responsible for
driving safety.
●
Inuence of weather, road
conditions, and other factors may
cause ISLC to fail or lead to late
alarms.
●
Use ISLC based on your needs,
trac, and road conditions.
High Beam Assist (HMA)*
The high beam assist (HMA) system
automatically activates or deactivates
the high beam based on current driving
conditions assessed by using sensors
of the multifunctional video controller,
when vehicle speed exceeds 35 km/h.
Status Description
●
HMA standby: When the function is
enabled but not activated yet,
is
displayed on the instrument cluster.
●
HMA activated: With the function
enabled, when you set the light switch
to the auto lights position, the light
meets conditions, and vehicle speed
exceeds 35 km/h,
is displayed.
●
HMA failure: HMA has failed.
is
displayed on the cluster at this time.
Usage
●
To enable or disable HMA, go to
infotainment touchscreen
, and tap
127
04
USING AND DRIVING
To Next Page
Loading...
