BYD SEAL - Page 147

driving performance under complex road
conditions. When the wheels show signs
of slipping, this system can adjust the
driving torque of the front and rear
axles rapidly to ensure the stability of
the vehicle torque and make the vehicle
obtain better driving performance under
di󽗈erent road surfaces.
●
Tap Infotainment system
→ New
energy → iTAC to start.
WARNING
●
This function is not designed for
severe driving stability of the
vehicle. Make sure the braking
system work normally in the
following situations:
●
Vigorous driving behaviors such
as drifting, and driving on
continuous bends
●
Driving on slippery, muddy,
sandy or snowy roads.
●
Driving on roads with multiple
potholes or on uneven roads.
●
Driving on bumpy roads.
REMINDER
●
When there is braking
participation or braking action,
such as the driver stepping on the
brake pedal and ESC triggering,
this function will exit the priority
guarantee braking.
Driver Attention Warning
(DAW)*
Driver Attention Warning (DAW)*
The driver’s attention warning system
evaluates the driver’s fatigue according
to the vehicle operating state. The
driver would be reminded according to
the evaluation results to ensure driving
safety.
Usage
With the vehicle powered on, set the
warning in
→ Driving Assist → ADAS
→ Driver Attention Warning (DAW). For
safety considerations, the setting is valid
on the current trip only, and will revert to
the default mode on the next trip.
WARNING
●
The driver should pull over the
vehicle as soon as possible when
feeling tired.
CAUTION
The driver monitoring system is
only an auxiliary system and is
not capable of e󽗈ective recognition
and alarm-raising in all situations.
It cannot completely replace the
driver's subjective observation and
judgment. The driver must maintain
control of the vehicle at all times,
complying with all road laws
and regulations, and taking full
responsibility for the vehicle.
Child Presence Detection
(CPD)
When the vehicle is powered o󽗈, lock the
vehicle after getting out of it, the system
146