2. To open the hood: Raise the hood
to an appropriate height; then it will
automatically rise to the open state.
3. To close the hood: Pull down the hood,
and press it with force by hand to close
it.
4. After closing the hood, check whether
the latch is securely locked.
REMINDER
●
Ensure that the hood is closed
and locked rmly. Otherwise, the
hood may suddenly open during
driving, resulting in an accident.
REMINDER
●
Do not force down the hood or
release it from a high position.
Cooling System
●
It is required that the liquid level
should be between the Maximum(MAX)
and Minimum(MIN) marker lines of the
coolant expansion tank.
●
The coolant should always be
of the same specication as the
original refrigerant, without adding
any mixture. Dierent brands and
types of coolant should not be mixed.
●
If the level is below the MIN line,
coolant should be relled to the MAX
line. Check the cooling system for
leakage.
REMINDER
●
Opening the coolant expansion
tank when the motor has not
yet fully cooled down may cause
coolant to squirt out, resulting in
severe burns.
CAUTION
●
Do not add any rust inhibitor
or other additives to the cooling
system. This is because these
179
06
MAINTENANCE
To Next Page
Loading...
