BYD SEAL - Page 181

CAUTION
additives may be incompatible
with the coolant or motor
components.
●
Before opening the coolant
expansion tank, verify that the
motor, high-voltage electrical
control integration module,
coolant expansion tank cap and
the radiator have cooled down.
Braking System
●
Check the level in the 󽗊uid tank
monthly, and change the brake 󽗊uid
according to the travel time and
mileage speci󽗉ed in Maintenance
Schedule.
●
Be sure to use the brake 󽗊uid of the
same speci󽗉cations as the original
brake 󽗊uid, and di󽗈erent types of
brake 󽗊uid should not be mixed.
●
It is required that the level in the
󽗊uid tank should be between "MAX"
(maximum level) and "MIN" (minimum
level) marks.
●
If the level is below the MIN mark,
check if the braking system leaks and
the brake friction blocks are worn.
Windshield Washer
●
During normal use, check the liquid
level of the windshield washer
reservoir at least monthly.
●
If the windshield washer is used
frequently, the level of the washer
reservoir should be checked more
frequently.
●
High quality windshield washer 󽗊uid
should be added to improve stain
removal and prevent freezing in cold
weather.
●
When re󽗉lling the washer 󽗊uid, use a
clean cloth dipped in the windshield
washer 󽗊uid to clean the windshield
wiper blade, thus helping keep the
wiper blade in good condition.
CAUTION
●
Do not inject vinegar-water
solution into the windshield
washer 󽗊uid reservoir.
●
It is recommended to use certi󽗉ed
windshield washing 󽗊uid.
A/C System
●
The A/C system is a closed system,
and any important maintenance work
should be performed by professionals
from a BYD authorized dealer or
service provider.
180