●
The front passenger seat is equipped
with tether strap anchorages on the
back.
WARNING
●
Where applicable to use a top
tether strap with the child
restraint system, ensure the strap
is routed through the hole in
the head support before attaching
and tensioning the strap to the
anchorage point at the base of the
seat.
Rear outboard seat
●
The anchorage is provided on the
rear outboard seat, and it will
only be visible after pressing its
decorative cover (the label showing the
anchorage is attached to the seat).
●
Anchor supports (for the top tether)
are provided at the rear outboard seat.
CAUTION
●
Secure the top tether when
installing the CRS.
Installing Child Restraint Systems
Precautions
① Do not turn the anchorage lever trim
cover outward.
② Push the anchorage lever trim cover
inward in use.
③ Press the upper part of anchorage lever
trim cover to reset after use.
26
To Next Page
Loading...
