2.Prepare the Battery
1).Check the battery level of the aircraft
2).Charge the Batteries of the aircraft
Check battery level
Power indicator Light
Current capacity
LOW
FULL
Power
outlet
Red Normally on(charging)
Green Normally on(charge complete)
Expand antennas
outward, like is
shown above.
Rotate the
antennas,
as shown
above.
Adjust the antennas to
45°with the remote
control and expand the
Put the battery
into the back slot
of the remote
control, like
shown above.
Please turn off the power of the remote control and put the battery
into the remotecontrol.
To avoid potential damage and loss, please use C-FLY or certified
batteries and chargers.
mobile device
support as
shown above.
1).Please prepare the remote control according to the following
steps:
2).Charging RC battery:
Turn on RC,check status of indicator,when indicator light shows green always
on, means Sufficient battery power,can use normally, when indicator light shows
flashing red-green,means insufficient battery power, please charge the battery
for the remote control according to the following steps: