CAB XD4M - Setting the Material Sensor

14 14
4.1.3 Setting the Material Sensor
1 32 4
Fig. 11 Setting the material sensor
Thematerialsensor(2)canbeshiftedperpendiculartothedirectionofmediaowforadaptationtothemedia.The
sensor unit is marked with indentation (4) on the label sensor retainer.
 Slightly loosen the screw (3) with Allen key (1).
 Positionsensorbymovingitinsuchawaythatthesensorcandetectareexorcut-outmark.
 Tighten the screw (3).
4 Loading Material