6913 Communications module 7-21
Revision J2005-2 J-Type
:16144 &RPPV#5#$X[#*URXS#5RXWLQJ#VZLWFKHV
Eleven switches for routing the input from the Comms 2 section to any or all of the
Auxiliary Groups. Note that last switch (labelled ‘AUX L+R’) is the routing switch for
the Stereo Aux Group.
:16145 &RPPV#5#3)/
A PFL switch is included in each communications channel to allow instantaneous
monitoring of the input signal.
:16146 &RPPV#5#087(
The MUTE switch is provided so that the Comms 2 section can be turned ‘off’ when
not required, or is being used in conjunction with the Talkback switch.
:16147 7DONEDFN#VZLWFK
The Talkback (momentary) switch overrides the section Mute relay. When you want
to use the Comms 2 section in Talkback mode, the procedure is as follows:
(a) Set up the required routing and adjust the input and output levels.
(b) Press the Comms 2 Mute switch, so that no output is being sent.
(c) Press Talkback to talk.
To Next Page
Loading...