J-Type CCM 2-17
Revision J2005-2 J-Type
51914; 6KRZ#7LPH
In the system menu, select “
Test System?”
using the Up or Down arrow button.
The display shows “
Test System?”.
■
■■
■
Press [
↵
], followed by the Down Arrow button, until the display shows “
Show
Time?
”
■
■■
■
Press [
↵
]. The display shows the time as set in the PC.
Press [Esc] to return to the system menu or Down arrow to perform next test.
51914< 6KRZ#'DWH
In the system menu, select “
Test System?”
using the Up or Down arrow button.
The display shows “
Test System?”.
Press [
↵
], followed by the Down Arrow button, until the display shows “
Show Date?
”
■
■■
■
Press [
↵
]. The display shows the date as set in the PC.
Press [Esc] to return to the system menu or Down arrow to perform next test.
NOTE:
The Time/Date do not increment when power is removed from the console.
They rely upon SAM updating them when communications are first established.
519153 9LHZ#(UURU#/RJ
In the system menu, select “
Test System?”
using the Up or Down arrow button.
The display shows “
Test System?”.
Press [
↵
], followed by the Down Arrow button, until the display shows “
View Error
Log?
”
■
■■
■
Press [
↵
]. The display lists the time and date of errors/events.
■
■■
■
Select
Time/Date
with the arrow keys.
■
■■
■
Press the Right arrow key to display the type of error.
■
■■
■
Press the Left arrow key to get back to the list of time/date.
NOTE:
Some messages are included in the error log for debugging purposes that
are not in themselves errors. Examples are Time/Date reset
or
Host is Séance
on
the display are not errors.
Press [Esc] to return to the system menu.
519154 &OHDU#(UURU#/RJ
In the system menu, select “
Test System?”
using the Up or Down arrow button.
The display shows “
Test System?”.
■
■■
■
Press [
↵
], followed by the Down Arrow button, until the display shows “
Clear
Error Log?
”
■
■■
■
Press [
↵
↵↵
↵
]. The log is cleared and the event is entered in the Error log.
This test automatically returns to the system menu.
To Next Page
Loading...