Cadac J-Type - Page 56

3-6 7865 Stereo Input Channel
J-Type Revision J2005-2
614156 6WHUHR#$X[ #6HQG#¶2Q22II·
The default setting for the channel auxiliary send circuits is ‘off’ and post-fader.
Press the “ON” button to switch the stereo aux send section into circuit.
614157 $X[#6HQG#/HYHO
Level control for an auxiliary send section.
614158 6WHUHR#$X[ #6HQG#/HYHO
Level control for the stereo auxiliary send section.
:;98#6WHUHR#,QSXW#&KDQQHO
3.1.27 HF EQ Boost/Cut and Fre-
quency Controls
3.1.29 HMF EQ Boost/Cut and Fre-
quency Controls
3.1.31 LMF EQ Boost/Cut and Fre-
quency Controls
3.1.33 LF1 EQ Boost/Cut and Fre-
quency Controls
3.1.38 LP Filter Frequency
3.1.39 HP Filter Frequency
3.1.42 Main PFL
3.1.43 Channel Mute
3.1.26 HF EQ “Q” Control
3.1.28 HMF EQ “Q” Control
3.1.30 LMF EQ “Q” Control
3.1.32 LF EQ “Q” Control
3.1.34 EQ In/Out
3.1.35 LP Filter In/Out
3.1.36 HP Filter In/Out
3.1.37 EQ and Filters Pre and Post
Insert
3.1.40 Insert In/Out
3.1.41 All Modules Isolate