4-8 7925 Programmable Group Module
J-Type Revision J2005-2
714164 6XE#*URXS#,VRODWH
Isolates the Sub Group functions from the Cue Automation.
714165 6XE#WR#0DWUL[#3UH0)DGHU
Switches the Sub to Matrix send to be Pre-Fader.
714166 6XE#*URXS#,QMHFW#2Q22II
Switches Sub Group Inject On/Off.
714167 6XE#*URXS#,QMHFW#/HYHO
Sets the input level of the inject input.
714168 6XE#*URXS#,QMHFW#/HYHO#1XOO#/('
Indicates Sub Group Inject Level Null. The Null LED will be illuminated if the position
of the inject pot is different from the programmed position. To recall the programmed
position, rotate the pot until the LED extinguishes.
714169 6XE#*URXS#)DGHU#1XOO#/('
Indicates Sub Group Fader Null. The Null LED will be illuminated if the position of the
inject pot is different from the programmed position. To recall the programmed posi-
tion, slide the fader until the LED extinguishes.
71416: 6XE#*URXS#)DGHU#¶2SHQ·#1XOO#/('
Indicates Sub Group Fader open. The LED will extinguish if the fader is at the bottom
or if a DC Master shuts it down.
71416; 6XE#*URXS#,QVHUW#,Q22XW
Switches sub group INSERT in/out.
71416< *URXS#0RGXOH#,VRODWH
Switches the complete module in or out of the Cue Automation.
714173 6XE#*URXS#3)/
Illuminated sub group PFL switch.
714174 3RWHQWLRPHWHU#5HFDOO#:DUQLQJ
When flashing indicates that one or more control is not at its preset position.
To Next Page
Loading...