3.
Once the zone number appears in the display,
press the on/off button quickly until the correct
zone number appears in the display. Stop pressing
the button and the mirror will return to normal
operation.
If
C
appears in the compass window, the
compass may need calibration. See
Compass
Calibration
listed previously.
Cleaning the Mirror
When cleaning the mirror, use a paper towel or similar
material dampened with glass cleaner.
Do
not spray
glass cleaner directly on the mirror as that may cause
the liquid cleaner to enter the mirror housing.
Outside
Power
Mirrors
Press
(R)
on the selector switch to choose the right
mirror or
(L)
to choose the left mirror. The center position
is off and will not move the mirrors
if
the control pad
is touched.
To adjust a mirror, press the arrows on the control pad
to move the mirror in the direction you want the
mirror to go. Adjust each mirror
so
you can see the side
of
your vehicle and the area behind your vehicle.
2-42
To Next Page
Loading...
Need help?
General
