Two personalized exit positions can be set by first
recalling the driving position (by pressing
1
or
2),
then
positioning the steering wheel and seat in the desired
exit positions and then pressing and releasing the
MEMORY SET button and, within five seconds, pressing
the EXIT button. With the vehicle in PARK (P), the
exit position for the previously set driver can be recalled
by pressing the EXIT button. The mirrors, power
lumbar and shoulder belt height positions will not be
stored or recalled.
Further programming for automatic seat and mirror
movement can be done using the Driver Information
Center
(DIC).
You can select or not select the following:
0
Automatic seat and mirror movement when the
vehicle is unlocked with the remote keyless
entry transmitter, or
automatic seat and mirror movement when a key
is
placed in the ignition.
For programming information, see
DlC Vehicle
Personalization on page
3-67.
2-56