The mirrors can be manually folded inward to prevent
damage when going through an automatic car wash. To
fold, push the mirror toward the vehicle.
To
return the
mirror to its original position, push outward. Be sure
to return both mirrors to their original unfolded positions
before driving.
The mirrors also have an arrow on the mirror face that
flashes in the direction of the turn when the turn
signal
is
used. See
Turn SignaVMultifunction Lever on
page
3-8.
The mirrors can also be programmed for personalization
and the parallel parking feature
if
you have the
optional memory package. For more information, see
Memory Seat, Mirrors and Steering Wheel on page
2-55
and
DIC
Vehicle Personalization on page
3-67.
Outside Automatic Dimming
Mirror
If your vehicle is equipped with this feature, the
driver’s side mirror will adjust for the glare of headlamps
benina’ you.
Tnis
feature
is
controiiea by rne
on
ana
off settings on the automatic dimming rearview mirror.
See
Automatic Dimming Rearview Mirror with Onstat@
on page 2-40.
if
your vehicle
is
equipped with memory mirrors, it will
also be capable of performing the curb view assist mirror
feature. This feature will cause the passenger’s mirror
to tilt to a factory programmed position when the vehicle
is in REVERSE (R). This feature may be useful in
allowing
you
to view the curb when you are parallel
parking.
When the vehicle is shifted out of REVERSE (R) and a
five-second delay has occurred, the passenger’s
mirror will return to its original position.
If further adjustment is needed after the mirror is tilted,
the mirror switch may be used.
This feature can be enabled/disabled through the Driver
Information Center
(DIC).
See
DIC Vehicle
Personalization on page
3-67
for more information.
2-43
To Next Page
Loading...
Need help?
General
