MBrror
to
Curb
!!I
Reverse
If
your vehicle has the optior;al
memory
package,
you
will have this feature. This feature will move the
passenger’s outside rearview mirror to a curb view
position when the shift lever is placed in REVERSE (R),
and it will return the mirror to the last
known
driving
position when the shift lever is moved out
of
REVERSE (R). See
Outside
Curb
View
Assist
Mirror
on
page
2-43
for more information.
Programmable Modes
Mode
1:
ON
Mode
2:
OFF
Before your vehicle was shipped from the factory, it was
programmed to Mode
2.
The mode to which the
vehicle was programmed may have been changed since
it left the factory. To determine the mode to which the
vehicle is programmed
or
to program the vehicle to
a different mode, do the following:
1.
Enter FEATURE PROGRAMMING following the
instructions listed previously.
2.
Press the down arrow on the INFO button until
MIRROR TO CURB IN REV appears on the DIC
display.
3.
To turn on the feature, press the ON/OFF button
until ON appears on the DIC display. To turn it
off,
press the ON/OFF button until OFF appears on
the display.
The mode you selected
is
now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
3-77
To Next Page
Loading...
Need help?
General
