The controls for this feature are located to the left of
and below the steering wheel. They are used to adjust
the brightness and location of the image. Adjust the
IMAGE control
so
the image is as low as possible while
remaining visible.
Slide the dimmer control until the image is no brighter
than necessary to cieariy ana comtortabiy see tne image.
When the system comes on, you’ll see the Night Vision
System symbol in the image. After about one minute,
you should see the view of the road ahead.
If
you don’t
see the image after about two minutes (on cold days
be something wrong with the system. See your
dealer for service.
it
may
take
!QnCJW
for
the
image
to
diSp!ay),
there
ma.)/
If
the Night Vision System image is too bright,
or
too
high in your field of view, it may take
you more time to see things you need to see
when it’s dark outside. Be sure
to
keep the
image dim and placed low in your field
of
view.
Remember that the Night Vision System, can only help
you see objects that are warmer or colder than the
surroundings. It can’t sense things like brake lights, turn
signals or emergency flashers, traffic lights or signs.
3-23
To Next Page
Loading...
Need help?
General
