if
your vehicle is equipped
with
this feature, you
can store and recall climate control settings for the
temperature, the fan speed and the direction
of
the airflow.
Memory buttons
1
and
2
are located on the driver’s door
panel and correspond to the numbers
1
or
2
found on
the back of each remote keyless entry transmitter.
To
recall the climate control settings last stored on your
transmitter, press the unlock button
on
your remote
keyless entry transmitter and put the ignition in
ACCESSORY or
ON.
The settings will be recalled.
To change the stored settings, do the following:
1.
Select the desired temperature, fan speed and
airflow mode.
If
desired, a separate temperature
setting may also be selected for the front seat
passenger. For information on how to do this, see
“Dual Climate Control System” listed previously
in this section.
2.
3.
Locate memory buttons
1
and
2
on the driver’s door
panel.
Press the memory button on the door panel that
corresponds to the number on the back of the
transmitter you are programming, until you hear two
beeps. The beeps confirm that your selection has
been saved and can now be recalled. For more
information on the memory feature, see
Memory
Seat, Mirrors and Steering Wheel on page
2-55.
Follow these steps each time you want to change the
stored settings.
3-39
To Next Page
Loading...
Need help?
General
