If
the belt stops before
it
reaches the buckle, tilt the
latch plate and keep pulling until you can buckle it.
Pull up on the latch plate to make sure it is secure.
If
the belt is not long enough, see
Safety
Belt
Extender on
page
1-28.
Make sure the release button on the buckle is
positioned
so
you would be able to unbuckle the
safety belt quickly
if
you ever had to.
3.
To make the lap part tight, pull down on the buckle
end of the belt as you pull up on the shoulder part.
1-24
To Next Page
Loading...
