8;
Now connect the black
negative
(-) cable to
the negative
(-)
terminal location of the
vehicle with the
good battery. Use a
remote negative
(-)
terminal
if
the vehicle
has one.
Connect the other
end
of the negative
(-)
cable to the
negative
(-)
terminal
location on the vehicle
with the dead battery.
Your vehicle has a
remote negative
(-)
terminal marked
GND
(-).
Don’t let the other end
of
the cable touch
anything until the next step. The other end
of
the
negative
(-)
cable doesn’t go to the dead battery.
It goes to a heavy, unpainted metal engine part
or to a remote negative
(-)
terminal on the vehicle
with the dead battery.
10.
11.
Now start the vehicle with the good battery and run
the engine for a while.
Try to start the vehicle with the dead battery.
If
it
won’t start after a few tries, it probably needs
service.
5-47
To Next Page
Loading...
Need help?
General
