Vinyl
Use warm water and a clean cloth.
Rub with a clean, damp cloth to remove dirt. You
may have to do this more than once.
Things like tar, asphalt and shoe polish will stain
if
you don’t get them off quickly. Use a clean cloth
and vinylheather cleaner. See your dealer for
this product.
Leather
Use a
soft
cloth with lukewarm water and a mild soap or
saddle soap and wipe dry with a
soft
cloth. Then, let
the leather dry naturally.
Do not use heat to dry.
For stubborn stains, use a leather cleaner. See your
dealer for this product.
Never
use oils, varnishes, solvent-based or abrasive
cleaners, furniture polish or shoe polish on leather.
Top of the Instrument Panel
Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones
or waxes may cause annoying reflections in the
windshield and even make
it
difficult to see through the
windshield under certain conditions.
Interior Plastic Components
Use only a mild soap and water solution
on
a soft cloth
or sponge. Commercial cleaners may affect the
surface finish.
Soiled or stained leather should be cleaned
immediately.
If
dirt is allowed to work into the finish,
it
can harm the leather.
5-86
To Next Page
Loading...
