If a LATCH-type c...., restraint
isn’t
attacheL
-0
its
anchorage points, the restraint won’t be
able to protect a child sitting there. In a crash,
the child could be seriously injured or killed.
Make sure that a LATCH-type child restraint
is
properly installed using the anchorage points,
or use the vehicle’s safety belts to secure the
restraint. See “Securing a Child Restraint
Designed for the LATCH System” or “Securing
a Child Restraint in a Rear Seat Position”
in
the index for information on how to secure a
child restraint
in
your vehicle.
Securinn
a
a
Child
Restraint
Designed
for
the
LATCH System
1.
Find the anchors for the seating position you want
to use, where the bottom
of
the seatback meets the
back of the seat cushion.
2.
Put
the
child
restraint
on
the seat.
3.
Attach the anchor points on the child restraint to the
anchors in the vehicle. The child restraint
instructions will show you how.
4.
If
the child restraint is forward-facing, attach the top
strap to the top strap anchor. See
Top
Strap
on
page
1-39.
Tighten the top strap according to
the child restraint instructions.
directions to be sure it is secure.
5.
Push and pull the child restraint in different
To remove the child restraint, simply unhook the top
strap from the top tether anchor and then disconnect the
anchor points.
1-43
To Next Page
Loading...
Need help?
General
