........................................
...........
................
....
....
.....
....
....
..”.
.....
...........
....
....
................
....
....
...
:..
:-.::...
:
:-.:L
....
....
........
”.
.”...
.”
......................
...
.......................
Column Shifter (Digital and Analog Cluster similar)
PARK (P): This position locks the front wheels. It’s the
best position to use when you start the engine
because your vehicle can’t move easily.
It
is
dangerous to get out of your vehicle if the
shift lever
is
not fully
in
PARK (P) with the
parking brake firmly set. Your vehicle can roil.
CAUTION: (Continued)
Don’t leave your vt=hiclt= when the engine is
running unless you have to. If you have
left
the
engine running, the vehicle can move
suddenly. You or others could be injured.
To
be sure your vehicle won’t move, even when
you’re on fairly level ground, always set your
parking brake and move the shift lever to
PARK (P). See “Shifting Into Park (P)” in the
Index. If you’re pulling
a trailer, see “Towing a
Trailer”
in
the Index.
Ensure the shift lever is fully in PARK (P) before starting
the engine. Your vehicle has an automatic transaxle
shift lock control system. You have to fully apply
your regular brakes before you can shift from PARK (P)
when the ignition key is in
ON.
If
you cannot shift out
of
PARK
(P),
ease pressure on the shift lever
-
push the
shift lever all the way into PARK
(P)
as you maintain
brake application. Then move the shift lever into
the gear you wish. See
Shifting Out of
Park
(P)
on
page
2-37.
2-28
To Next Page
Loading...
Need help?
General
