2.2 Brief description of the appliances (technical data, see page 29)
2.2.1 c35
The c35 is a fully automatic coffee machine and is used to dispense various coffee prod-
ucts as well as to heat and froth up milk. The bean hoppers are used to fill the appliance
with whole beans. A special insertion chute allows coffee powder to be used.
The c35 basic model can dispense pre-programmed coffee products. The dispense com-
mand is issued via direct selection keys which are on the control panel. Drink selection
and additional functions (cleaning, operating status, filling level, etc.) are indicated on the
display.
2.2.2 Milk cooler c35-mc (optional)
The milk cooler is used exclusively to cool milk. The milk container inside the appliance
is available in two versions: either with a nine-litre capacity or with two separate cham-
bers (not yet available) which can hold four litres of milk each. This two-chamber system
allows the storage of two different types of milk (e.g. whole milk and skimmed milk). The
milk is dispensed automatically according to the products.
2.2.3 Milk cooler c35-mcs (optional)
The milk cooler is used exclusively to cool milk. The milk is dispensed automatically ac-
cording to the drinks.
2.2.4 Milk cooler c35-mcu (optional)
The milk cooler is used exclusively to cool milk. The milk is dispensed automatically ac-
cording to the drinks.
2.2.5 Milk cooler c35-mc/cw (optional)
The milk cooler / cup heater combination appliance has two levels with heating elements
underneath and a cooling box. Authorised technicians can preselect four temperatures
for the heating elements. The milk cooler is used exclusively to cool milk. The milk is dis-
pensed automatically according to the drinks.
2.2.6 Cup warmer c35-cw (optional)
The freestanding cup warmer has three levels with heating elements underneath. Author-
ised technicians can preselect four temperatures for the heating elements.
2 Identification (continued)
To Next Page
Loading...
