Calculated Industries Machinist Calc 4086 - Time Calculations Using D:M:S; Trigonometric Functions; (Not Available on Model 4086)

60 — Ma c h i n i s t ca l c ™/ Ma c h i n i s t ca l c ™ Pr o
Convert 44.29° to degrees:minutes:seconds format:
KEYSTROKE DISPLAY
OO
0.
44.29g.
(dms◄►deg) DMS 44.17.24°
Note: Improperly formatted entries will be redisplayed in the correct
convention after any operator key is pressed. For example, 30° 89’
entered will be corrected and displayed as 31° 29’ 0” or 31.483333°.
Time Calculations Using D:M:S
Add 7 Hours 45 Minutes 33 Seconds to 11 Hours 16 Minutes 20
Seconds:
KEYSTROKE DISPLAY
OO
0.
7.45.33+
DMS 7.45.33°
11.16.20=
DMS 19.01.53°
Trigonometric Functions (NOT AVAILABLE ON MODEL 4086)
Trigonometric functions are available on the Machinist Calc Pro
calculator.
The following drawing and formulas list basic trigonometric
formulas, for your reference:
(cont'd)